Віаком | Продукція | Джерела живлення Vicor | Продукція компанії Vicor

Інвертори Wenzhou Rogerele Electronic Technology Co., Ltd.

Промисловий 3D друк

https://hobbytech.com.ua/

Обладнання для виробництва електроніки

Обладнання для виробництва електроніки NeoDen

Модулі Vicor V•I Chip solution

Vicor 48 V BCM Bus Converter Module	Vicor 48 V PRM Pre-Regulator	Vicor VTM Voltage Transformation Module

ZVS / ZCS isolated Sine Amplitude Converter Input: 38 – 55 Vdc Output: Eleven models, 1.5 to 48 V Power: Up to 300 W (450 W for 1 ms) Efficiency: Up to 96% High density: Up to 1,036 W/in3 (68 W/cm3) Small footprint: 1.1 in2 (7.1 cm2) 125°C operation (Tj) Low weight: 0.5 oz (15 g) >3.5 million hours MTBF Low noise: No output filtering required J-Lead package pick & place / SMD compatible Through-hole pin option	48 Vin ZVS buck / boost regulator Input: 36 – 75 Vdc or 38 – 55 Vdc Provides 26 – 55 Vdc output factorized bus for 48 Vin VTMs Efficiency: Up to 97% High density: Up to 1,105 W/in3 (55 W/cm3) Small footprint: 1.1 in2 (7.1 cm2) 125ºC operation (Tj) Low weight: 0.5 oz (15 g) J-Lead package pick & place / SMD compatible Through-hole pin option	48 Vin Sine Amplitude Converter 26 – 55 Vdc input range 0.8 – 55 Vdc outputs Efficiency: Up to 97% High density: Up to 345 A/in3 Up to 100 A or 300 W Small footprint: Up to 90 A/in2 125ºC operation (Tj) Low weight: 0.5 oz (15 g) Isolation to 2,250 Vdc Low noise: No output filtering required J-Lead package pick & place / SMD compatible Through-hole pin option

Vicor High Voltage BCM Bus Converter Module	Vicor 24 V PRM Pre-Regulator Module	Vicor QPI for V•I Chips Input Filter Module

ZVS / ZCS isolated Sine Amplitude Converter 330 – 365 Vdc to 11 Vdc @ 300 W 360 – 400 Vdc to 12 Vdc @ 300 W Efficiency: Up to 97% High density: Up to 1,034 W/in3 Small footprint: 1.1 in2 (7.1 cm2) 125°C operation (Tj) Isolation to 4,242 Vdc >2.6 million hours MTBF Low noise: No output filtering required Low weight: 0.5 oz (15 g) J-Lead package pick & place / SMD compatible Through-hole pin option	24 Vin ZVS buck / boost regulator Input: 18 – 36 Vdc Provides 26 – 55 Vdc output factorized bus for 48 Vin VTMs Efficiency: Up to 95% High density: Up to 414 W/in3 (25 W/cm3) Small footprint: 1.1 in2 (7.1 cm2) 125ºC operation (Tj) Low weight: 0.5 oz (15 g) J-Lead package pick & place /SMD compatible Through-hole pin option	Support EN55022, Class B limits Compatible with 48 and 24 V V•I Chips Efficiency: >99% Up to 65 dB CM attenuation at 1 MHz Up to 80 dB DM attenuation at 1 MHz 7 A models, parallelable for up to 14 A Hot-Swap models available Supports AdvancedTCA® PICMG3.0 requirements 12,5 x 25 x 4,5 mm LGA package 25 x 25 x 4,5 mm package for Hot-Swap models

Brick Solution

Vicor VI-200 / VI-J00 DC-DC Converter	Vicor Maxi / Mini / Micro DC-DC Converter	VI BRICK PRM / VTM / BCM

Input voltage ranges: 10 – 400 Vdc Output voltages: 1 – 95 Vdc Output power (per module): VI-200: 50 – 200 W /VI-J00: 25 – 100 W Parallelable for higher power 100°C operation / 85°C for VI-200 Efficiency: Up to 90% Agency approvals: CE Marked cULus, cTÜVus	Input voltages: 24, 28, 48, 72, 110, 150, 300, 375 Vdc Output power: 50 – 600 W 100°C, no derating High efficiency Low-noise ZCS / ZVS High power density: Up to 120 W/in3	Brick solution for Factorized Power Thermally enhanced package – baseplate and through-hole pin 100˚C baseplate operation Small footprint: 2.08 in2 Low profile: 0.37 inches above board Efficiency: Up to 97% High power density: Up to 390 W/in3

Vicor VI Brick DC-DC Converter	QPI Family Active EMI Input Filters	QPO Family Active Output Ripple Attenuators

Input voltages: 24, 28, 48, 72, 110, 150, 300, 375 Vdc Output power: 50 – 600 W 100°C, no derating High efficiency Low-noise ZCS / ZVS High power density: Up to 120 W/in3	Up to 60 dB CM attenuation at 250 kHz Up to 80 dB DM attenuation at 250 kHz Up to 14 A Efficiency: >99% at full load High density, low profile LGA package Designed to support EN Class B I ntegrated Hot-Swap in select models Current rating supports ATCA® blades –40ºC to +100ºC PCB temperature Compatible with most industry standard DC-DC converters	>30 dB PARD attenuation, 1 kHz to 500 kHz 3 – 30 Vdc and 0.3 – 5.5 Vdc input models Up to 20 A Supports precise point-of-load regulation Reduces required number of output capacitors to support dynamic loads Selectable optimization of attenuation, power dissipation, transient load response Compatible with most industry standard DC-DC converters

Front-end Modules	Input Filter Modules	Output Filter Modules

Up to 1,000 W power output 85 – 264 Vac input Efficiency: 90 – 98% Agency approvals: CE Marked, cTÜVus, cULus Operating temperature: –55°C to +100°C Inrush current limiting	24, 48 and 300 V models Efficiency: Up to 98% Agency approvals: CE Marked, cTÜVus, cULus Operating temperature: –55°C to +100°C Designed to meet EN Class B, Bellcore and FCC transient and immunity	5 – 50 V, Up to 20 A 3 – 30 V, Up to 30 A Efficiency: Up to 98% Up to 40 dB attenuation from 60 Hz to 1 MHz Operating temperature: –55°C to +100°C

Picor solutions

Cool-ORing™ Series Controllers	Cool-ORing™ Series Full-Function Solutions

Fast dynamic response 4 A gate discharge current Accurate MOSFET voltage sensing Overtemperature fault detection Adjustable reverse current blanking timer Withstands 100 V transients in low-side applications Master / Slave I/O for paralleling Active low-fault flag output Compatible with bricks and V•I Chips	Combines a high-speed ORing MOSFET controller and a very low on-state resistance ORing MOSFET Integrated high-performance MOSFET PI2121: 8 V, 24 A, 1.5 mΩ PI2122: 7 V, 12 A, 6 mΩ (back-to-back MOSFET) PI2123: 15 V, 15 A, 3 mΩ PI2125: 30 V, 12 A, 5.5 mΩ Very small, high density optimized solution fast dynamic response Accurate sensing capability Compatible with bricks and V•I Chips

Configurable power supplies

VIPAC AC-DC or DC-DC Power Solution	VIPAC Arrays DC Input Power System	FlatPAC AC-DC Power Solution

Input voltage ranges: 115/230 Vac, 28 Vdc (MIL-COTS) Output voltages: 2 – 48 Vdc Output power: Up to 900 W Single, dual, or triple outputs Efficiency: 80 – 90% Local or remote control	Input voltages: 24, 300, Vdc Output voltages: 2 – 54 Vdc Output power: 50 – 650 W Array power: Up to 750 W Single, dual, triple or quad outputs Rugged, low profile, coldplate chassis High-temperature capability	Input voltage: 115/230 Vac input, autoranging Output voltages: 1 – 95 Vdc Output power: 50 – 600 W Single, dual, or triple outputs Low-noise ZCS / ZVS power technology Agency approvals: CE Marked, cTÜVus, cULus

ComPAC Input Power Solution	MegaMod Chassis-mount Converter	PFC FrontEnd 384 Vdc Output Front End

Input voltages: 24, 48 and 300 Vdc Output voltages: 1 – 95 Vdc Efficiency: 80 – 90% Power density: Up to 10 W/in3 Low-noise FM control ZCS / ZVS power architecture	Input voltage range: 10 – 400 Vdc Output voltages: 1 – 95 Vdc Output power: Up to 600 W Single, dual, or triple outputs Efficiency: 80 – 90% Low-noise ZCS power architecture	Input voltage ranges: 85 – 264 Vac and 100 – 380 Vdc Output power: Up to 2,200 W Up to 4 non-isolated outputs Operating temperature: –20°C to +45°C (full power) DIN rail mountable

PFC FlatPAC Single-Output Power System	LoPAC Family Switcher Power Supplies	MegaPAC Family User-Configured

Input voltage range: 85 – 264 Vac Output power: Up to 575 W 2 – 54 Vdc High efficiency Current limit Remote sense	Input voltage ranges: 85 – 264 Vac and 100 – 380 Vdc Output voltages: 2 – 95 Vdc (higher voltage available with series arrays) Output power: 25 – 1,500 W Up to 6 user-specifiable outputs Power density: Up to 11 W/in3	Input voltage range: 85 – 264 Vac Output voltage: 2 – 95 Vdc (higher voltage available with series arrays) Output power: 25 – 4,000 W Up to 20 outputs High power density

FlatPAC-EN AC-DC Power Solution	DC MegaPAC™ Power Switcher	VME450 Single-slot Power Supply

Input voltage ranges: 90 – 132 / 180 – 264 Vac, 180 – 264 Vdc Output voltages: 2 – 95 Vdc Output power: p to 500 W Up to 4 user-specifiable outputs	Input voltage range: 12 – 72 Vdc Output voltages: 2 – 95 Vdc Output power: Up to 1,600 W Up to 16 outputs	Vin max range: 18 – 36 Vdc Input power: 650 W Output power: 550 W Temperature: –40 to +85ºC Low profile: 0.670 in. max. height Utilizes Vicor’s V•I Chips

Javelin™ MIL-COTS Power Supply	PowerBank™ Low Profile Supply	Badger™ MIL-COTS Power Supply

Input voltage ranges: 85 – 254 Vac (PFC) / 85 – 380 Vdc Output voltages: Single output 2, 3.3, 5, 12, 15, 24, 28, 48 Vdc Output power: 600 – 5,400 W	Input voltage: 115/230 Vac Output voltages: 1.8 – 52 V Output power: 1000 W @ 230 Vac input, 800 W @ 115 Vac input Operating temperature: –20°C to +50°C	Input voltage ranges: 85 – 264 Vac and 100 – 380 Vdc Output power: Up to 1,800 W Up to 12 non-isolated outputs Operating temperature: –55°C to +65°C

© 2024 ТОВ "Віаком"