Виаком
телефон
поискпоиск входаккаунт корзинакорзина


на складе в Киеве под заказ

не выполнен вход

 

Источники питания Vicor > Vicor: продукция

Модули Vicor V•I Chip solution
Vicor 48 V BCM
Bus Converter Module
Vicor 48 V PRM
Pre-Regulator
Vicor VTM
Voltage Transformation Module
Модуль Vicor 48 V BCM Модуль Vicor 48 V PRM Модуль Vicor VTM
  • ZVS / ZCS isolated Sine Amplitude Converter
  • Input: 38 – 55 Vdc
  • Output: Eleven models, 1.5 to 48 V
  • Power: Up to 300 W (450 W for 1 ms)
  • Efficiency: Up to 96%
  • High density: Up to 1,036 W/in3 (68 W/cm3)
  • Small footprint: 1.1 in2 (7.1 cm2)
  • 125°C operation (Tj)
  • Low weight: 0.5 oz (15 g)
  • >3.5 million hours MTBF
  • Low noise: No output filtering required
  • J-Lead package pick & place / SMD compatible
  • Through-hole pin option
  • 48 Vin ZVS buck / boost regulator
  • Input: 36 – 75 Vdc or 38 – 55 Vdc
  • Provides 26 – 55 Vdc output factorized bus for 48 Vin VTMs
  • Efficiency: Up to 97%
  • High density: Up to 1,105 W/in3 (55 W/cm3)
  • Small footprint: 1.1 in2 (7.1 cm2)
  • 125ºC operation (Tj)
  • Low weight: 0.5 oz (15 g)
  • J-Lead package pick & place / SMD compatible
  • Through-hole pin option
  • 48 Vin Sine Amplitude Converter
  • 26 – 55 Vdc input range
  • 0.8 – 55 Vdc outputs
  • Efficiency: Up to 97%
  • High density: Up to 345 A/in3
  • Up to 100 A or 300 W
  • Small footprint: Up to 90 A/in2
  • 125ºC operation (Tj)
  • Low weight: 0.5 oz (15 g)
  • Isolation to 2,250 Vdc
  • <1 µs transient response
  • Low noise: No output filtering required
  • J-Lead package pick & place / SMD compatible
  • Through-hole pin option
Vicor High Voltage BCM
Bus Converter Module
Vicor 24 V
PRM Pre-Regulator Module
Vicor QPI for V•I Chips
Input Filter Module
Модуль Vicor High Voltage BCM Модуль Vicor 24 V PRM Модуль QPI for VI Chips
  • ZVS / ZCS isolated Sine Amplitude Converter
  • 330 – 365 Vdc to 11 Vdc @ 300 W
  • 360 – 400 Vdc to 12 Vdc @ 300 W
  • Efficiency: Up to 97%
  • High density: Up to 1,034 W/in3
  • Small footprint: 1.1 in2 (7.1 cm2)
  • 125°C operation (Tj)
  • Isolation to 4,242 Vdc
  • >2.6 million hours MTBF
  • Low noise: No output filtering required
  • Low weight: 0.5 oz (15 g)
  • J-Lead package pick & place / SMD compatible
  • Through-hole pin option
  • 24 Vin ZVS buck / boost regulator
  • Input: 18 – 36 Vdc
  • Provides 26 – 55 Vdc output factorized bus for 48 Vin VTMs
  • Efficiency: Up to 95%
  • High density: Up to 414 W/in3 (25 W/cm3)
  • Small footprint: 1.1 in2 (7.1 cm2)
  • 125ºC operation (Tj)
  • Low weight: 0.5 oz (15 g)
  • J-Lead package pick & place /SMD compatible
  • Through-hole pin option
  • Support EN55022, Class B limits
  • Compatible with 48 and 24 V V•I Chips
  • Efficiency: >99%
  • Up to 65 dB CM attenuation at 1 MHz
  • Up to 80 dB DM attenuation at 1 MHz
  • 7 A models, parallelable for up to 14 A
  • Hot-Swap models available
  • Supports AdvancedTCA® PICMG3.0 requirements
  • 12,5 x 25 x 4,5 mm LGA package
  • 25 x 25 x 4,5 mm package for Hot-Swap models
Brick Solution
Vicor VI-200 / VI-J00
DC-DC Converter
Vicor Maxi / Mini / Micro
DC-DC Converter
VI BRICK
PRM / VTM / BCM
Модуль Vicor Vicor VI-200 / VI-J00 Модуль Vicor Maxi / Mini / Micro Модуль Vicor VI Brick PRM / BTM / BCM
  • Input voltage ranges: 10 – 400 Vdc
  • Output voltages: 1 – 95 Vdc
  • Output power (per module):
  • VI-200: 50 – 200 W /VI-J00: 25 – 100 W
  • Parallelable for higher power
  • 100°C operation / 85°C for VI-200
  • Efficiency: Up to 90%
  • Agency approvals: CE Marked cULus, cTÜVus
  • Input voltages: 24, 28, 48, 72, 110, 150, 300, 375 Vdc
  • Output power: 50 – 600 W
  • 100°C, no derating
  • High efficiency
  • Low-noise ZCS / ZVS
  • High power density: Up to 120 W/in3
  • Brick solution for Factorized Power
  • Thermally enhanced package – baseplate and through-hole pin
  • 100˚C baseplate operation
  • Small footprint: 2.08 in2
  • Low profile: 0.37 inches above board
  • Efficiency: Up to 97%
  • High power density: Up to 390 W/in3
Vicor VI Brick
DC-DC Converter
QPI Family
Active EMI Input Filters
QPO Family
Active Output Ripple Attenuators
Модуль Vicor VI Brick DC-DC Converter Модуль Vicor QPI Family Active EMI Input Filters Модуль Vicor QPO Family Active Output Ripple Attenuators
  • Input voltages: 24, 28, 48, 72, 110, 150, 300, 375 Vdc
  • Output power: 50 – 600 W
  • 100°C, no derating
  • High efficiency
  • Low-noise ZCS / ZVS
  • High power density: Up to 120 W/in3
  • Up to 60 dB CM attenuation at 250 kHz
  • Up to 80 dB DM attenuation at 250 kHz
  • Up to 14 A
  • Efficiency: >99% at full load
  • High density, low profile LGA package
  • Designed to support EN Class B
  • I ntegrated Hot-Swap in select models
  • Current rating supports ATCA® blades
  • –40ºC to +100ºC PCB temperature
  • Compatible with most industry standard DC-DC converters
  • >30 dB PARD attenuation, 1 kHz to 500 kHz
  • 3 – 30 Vdc and 0.3 – 5.5 Vdc input models
  • Up to 20 A
  • Supports precise point-of-load regulation
  • Reduces required number of output capacitors to support dynamic loads
  • Selectable optimization of attenuation, power dissipation, transient load response
  • Compatible with most industry standard DC-DC converters
Front-end Modules Input Filter Modules Output Filter Modules
Модули Vicor Front-end modules Модули Vicor Input Filter Modules Модули Vicor Output Filter Modules
  • Up to 1,000 W power output
  • 85 – 264 Vac input
  • Efficiency: 90 – 98%
  • Agency approvals: CE Marked, cTÜVus, cULus
  • Operating temperature: –55°C to +100°C
  • Inrush current limiting
  • 24, 48 and 300 V models
  • Efficiency: Up to 98%
  • Agency approvals: CE Marked, cTÜVus, cULus
  • Operating temperature: –55°C to +100°C
  • Designed to meet EN Class B, Bellcore and FCC transient and immunity
  • 5 – 50 V, Up to 20 A
  • 3 – 30 V, Up to 30 A
  • Efficiency: Up to 98%
  • Up to 40 dB attenuation from 60 Hz to 1 MHz
  • Operating temperature: –55°C to +100°C
Picor solutions
Cool-ORing™ Series
Controllers
Cool-ORing™ Series
Full-Function Solutions
Vicor Cool-ORing™ Series Controllers Vicor Cool-ORing™ Series Full-Function Solutions
  • Fast dynamic response
  • 4 A gate discharge current
  • Accurate MOSFET voltage sensing
  • Overtemperature fault detection
  • Adjustable reverse current blanking timer
  • Withstands 100 V transients in low-side applications
  • Master / Slave I/O for paralleling
  • Active low-fault flag output
  • Compatible with bricks and V•I Chips
  • Combines a high-speed ORing MOSFET controller and a very low on-state resistance ORing MOSFET
  • Integrated high-performance MOSFET
    PI2121: 8 V, 24 A, 1.5 mΩ
    PI2122: 7 V, 12 A, 6 mΩ (back-to-back MOSFET)
    PI2123: 15 V, 15 A, 3 mΩ
    PI2125: 30 V, 12 A, 5.5 mΩ
  • Very small, high density optimized solution fast dynamic response
  • Accurate sensing capability
  • Compatible with bricks and V•I Chips
Configurable power supplies
VIPAC
AC-DC or DC-DC Power Solution
VIPAC Arrays
DC Input Power System
FlatPAC
AC-DC Power Solution
Vicor VIPAC AC-DC or DC-DC Power Solution Vicor VIPAC Arrays DC Input Power System Vicor FlatPAC AC-DC Power Solution
  • Input voltage ranges: 115/230 Vac, 28 Vdc (MIL-COTS)
  • Output voltages: 2 – 48 Vdc
  • Output power: Up to 900 W
  • Single, dual, or triple outputs
  • Efficiency: 80 – 90%
  • Local or remote control
  • Input voltages: 24, 300, Vdc
  • Output voltages: 2 – 54 Vdc
  • Output power: 50 – 650 W
  • Array power: Up to 750 W
  • Single, dual, triple or quad outputs
  • Rugged, low profile, coldplate chassis
  • High-temperature capability
  • Input voltage: 115/230 Vac input, autoranging
  • Output voltages: 1 – 95 Vdc
  • Output power: 50 – 600 W
  • Single, dual, or triple outputs
  • Low-noise ZCS / ZVS power technology
  • Agency approvals: CE Marked, cTÜVus, cULus
ComPAC
Input Power Solution
MegaMod
Chassis-mount Converter
PFC FrontEnd
384 Vdc Output Front End
Vicor ComPAC Input Power Solution Vicor MegaMod Chassis-mount Converter Vicor PFC FrontEnd 384 Vdc Output Front End
  • Input voltages: 24, 48 and 300 Vdc
  • Output voltages: 1 – 95 Vdc
  • Efficiency: 80 – 90%
  • Power density: Up to 10 W/in3
  • Low-noise FM control
  • ZCS / ZVS power architecture
  • Input voltage range: 10 – 400 Vdc
  • Output voltages: 1 – 95 Vdc
  • Output power: Up to 600 W
  • Single, dual, or triple outputs
  • Efficiency: 80 – 90%
  • Low-noise ZCS power architecture
  • Input voltage ranges: 85 – 264 Vac and 100 – 380 Vdc
  • Output power: Up to 2,200 W
  • Up to 4 non-isolated outputs
  • Operating temperature: –20°C to +45°C (full power)
  • DIN rail mountable
PFC FlatPAC
Single-Output Power System
LoPAC Family
Switcher Power Supplies
MegaPAC Family
User-Configured
Vicor PFC FlatPAC Vicor LoPAC Family Vicor MegaPAC
  • Input voltage range: 85 – 264 Vac
  • Output power: Up to 575 W 2 – 54 Vdc
  • High efficiency
  • Current limit
  • Remote sense
  • Input voltage ranges: 85 – 264 Vac and 100 – 380 Vdc
  • Output voltages: 2 – 95 Vdc (higher voltage available with series arrays)
  • Output power: 25 – 1,500 W
  • Up to 6 user-specifiable outputs
  • Power density: Up to 11 W/in3
  • Input voltage range: 85 – 264 Vac Output voltage: 2 – 95 Vdc (higher voltage available with series arrays)
  • Output power: 25 – 4,000 W
  • Up to 20 outputs
  • High power density
FlatPAC-EN
AC-DC Power Solution
DC MegaPAC™
Power Switcher
VME450
Single-slot Power Supply
Vicor PowerBank™ Low Profile SupplyVicor FlatPAC-EN AC-DC Power Solution Vicor DC MegaPAC™ Power Switcher Vicor VME450™ Single-slot Power Supply
  • Input voltage ranges: 90 – 132 / 180 – 264 Vac, 180 – 264 Vdc
  • Output voltages: 2 – 95 Vdc
  • Output power: p to 500 W
  • Up to 4 user-specifiable outputs
  • Input voltage range: 12 – 72 Vdc
  • Output voltages: 2 – 95 Vdc
  • Output power: Up to 1,600 W
  • Up to 16 outputs
  • Vin max range: 18 – 36 Vdc
  • Input power: 650 W
  • Output power: 550 W
  • Temperature: –40 to +85ºC
  • Low profile: 0.670 in. max. height
  • Utilizes Vicor’s V•I Chips
Javelin™
MIL-COTS Power Supply
PowerBank™
Low Profile Supply
Badger™
MIL-COTS Power Supply
Vicor Javelin™ MIL-COTS Power Supply   Vicor Badger™ MIL-COTS Power Supply
  • Input voltage ranges: 85 – 254 Vac (PFC) / 85 – 380 Vdc
  • Output voltages: Single output 2, 3.3, 5, 12, 15, 24, 28, 48 Vdc
  • Output power: 600 – 5,400 W
  • Input voltage: 115/230 Vac
  • Output voltages: 1.8 – 52 V
  • Output power: 1000 W @ 230 Vac input, 800 W @ 115 Vac input
  • Operating temperature: –20°C to +50°C
  • Input voltage ranges: 85 – 264 Vac and 100 – 380 Vdc
  • Output power: Up to 1,800 W
  • Up to 12 non-isolated outputs
  • Operating temperature: –55°C to +65°C
 
изготовление печатных плат | плис altera | микроконтроллеры atmel | магазин электронные компоненты | разъёмы amphenol | трансформаторы hahn | okw | tyco | vicor | marquardt | инструмент pro'skit